Power and Renewable Energy Course Description 2
Electrical Engineering Department Course Description (Lec, Lab, Cr. Hrs)
ELE205 Electronic Devices and Circuits I (3-2-4)
Basic properties of semiconductor materials. Theory of operation and applications of p-n junction diodes, Zener diodes and photodiodes. Theory of operation, biasing circuits, and small signal analysis of Bipolar Junction Transistor and Junction Field Effect Transistor. Transistor configurations and two-port network representation of transistor a.c. equivalent circuits. Analysis and design of transistor amplifier circuits. Prerequisite: ELE203
ELE305 Electronic Devices and Circuits II (3-2-4)
Operational amplifiers and their applications. MOSFETs: theory of operation and characteristics of depletion and enhancement type MOSFETs, analysis of various biasing circuits. Small-signal model and AC analysis of amplifiers. Frequency response of amplifiers. Multistage amplifiers. Feedback amplifiers and oscillator circuits. Power amplifiers. Prerequisite: ELE305
ELE310 Design with Integrated Circuits (3-2-4)
A review of Op-Amps and Digital IC families. Design of analog signal conditioning circuits. Design of power supplies using IC regulators. Op-amp applications. Design of systems for measuring and displaying the measured values on LEDs. Applications of ADC, DAC, and counter ICs. Optoisolators, triacs, and control of high-voltage systems and actuators. Design of signal generators. Applications of commonly used ICs such as VCO, PLL, Timer IC, F/V and V/F ICs. Prerequisite: ELE305
ELE421 VLSI Design (3-0-3)
Introduction to VLSI design. Review of basic logic gates in CMOS. Integrated circuit layers, sheet resistance, time delay, CMOS layers, designing FET arrays, stick diagrams, layouts of CMOS circuits. Fabrication of CMOS ICs. Design rules, physical limitations. Advanced techniques in CMOS logic circuits. General VLSI system components. Floor-planning and routing. DRAM, SRAM, ROM designs. Computer simulation using VHDL or Verilog. Prerequisites: ELE305, ELE202
ELE425 Optoelectronics (3-0-3)
Fundamental concepts of semiconductors optical properties. Characteristics and classification of detectors. Radiation sources, classification of radiation sources. Population inversion and gain in a two-level lasing medium. Optical feedback and laser cavity. P-N junction laser operating principles, threshold current, Hetero-junction lasers, Quantum well lasers, device fabrication and fiber coupling. Optical fibers and design of optical systems. Prerequisites: ELE305, ELE303
ELE204 Signals and Systems (3-0-3)
Continuous- and discrete-time signals and systems. Basic system properties. Linear Time-Invariant (LTI) systems. Properties of LTI systems. Convolution sum. Fourier series of periodic signals. Fourier transform of non-periodic signals. Filtering. Analysis of continuous-time LTI systems using Laplace transform. Prerequisite: MTH221
ELE302 Principles of Communication (3-2-4)
Introduction to fundamentals of communication systems. Amplitude Modulation (AM): Modulation index, spectrum of AM signals, AM circuits. Single side band modulation, frequency division multiplexing. Frequency Modulation (FM): Spectrum of FM signals, FM circuits. FM versus AM. Sampling, quantization, coding, pulse code modulation, delta modulation, time division multiplexing. Shift Keying methods. Prerequisite: ELE204
ELE303 Electromagnetic Fields and Wave Propagation (3-0-3)
Electrostatics: Coulomb’s Law, Gauss’s Law. Electric fields in material space, Polarization in Dielectrics. Ampere’s Law, Stoke’s Theorem. Time-varying Fields, Faraday’s Law, Maxwell’s Equations in point form, Maxwell's equations in integral form, boundary conditions. Wave equation, plane wave propagation, Poynting vector and average power. Transmission line theory, reflection and transmission on transmission lines. Prerequisites: PHY122, MTH221
ELE450 Digital Signal Processing (3-0-3)
Review of discrete-time signals and systems. Transform-domain representations of signals: Discrete-time Fourier Transform, Fast-Fourier Transform, applications of Z-Transform. Transform-domain representations of LTI systems: Types of transfer functions, stability condition and test. Frequency response of a Rational Transfer Function. The difference equation and Digital Filtering. Concept of filtering: Finite Impulse Response (FIR) and Infinite Impulse Response (IIR) Filters. Prerequisite: ELE204
ELE451 Communication and Switching Networks (3-2-4)
Introduction to computer networks, protocol architecture and OSI reference model. Local Area Network (LAN): Topologies and transmission media. high-speed LAN. Token-Ring, FDDI. Circuit switching and packet switching, ISDN, DSL, packet switching network, X.25, frame relay, ATM. Internetworking devices. UDP, TCP architecture, Internet protocols, TCP/IP. Application Layer: Client-server model, socket interface, SMTP, FTP, HTTP, and WWW. Wireless Networking. Prerequisite: ELE302
ELE456 Telecommunication Systems (3-0-3)
Introduction to telecommunication systems. Telecommunication fundamentals and transmission media characteristics. Design analog and digital data transmission schemes. Telephony systems: ISDN and PSTN, essentials of traffic engineering. Overview of Wireless LAN technology. Comparison of ZigBee with other standards and applications. Introduction to satellite and fiber optic based communications. Prerequisite: ELE302
ELE455 Wireless Communications (3-0-3)
Introduction to cellular mobile radio systems: Cellular-concept system design fundamentals, trunking and grade of service. Mobile channel, large scale and small-scale fading. Outdoor propagation models. Multiple access techniques for mobile communication. Modern wireless communication systems: Second-generation (2G) cellular networks, Third-Generation (3G) and Fourth Generation (4G) wireless systems. Prerequisites: ELE302, ELE303
ELE101 Computer Programming (3-0-3)
Problem solving using flowcharts, structure of a C++ program, data types, operators, variables and constants. Input and output, output formatting. Control Statements: IF and SWITCH, WHILE, DO-WHILE and FOR statements. Function definition and calling, library functions, arrays and strings, pointers. File input and output. Prerequisite: COM101
ELE202 Logic Design (3-2-4)
Basic theorems and properties of Boolean Algebra and Boolean functions. Simplification of Boolean functions: Karnaugh Map and Tabulation Method. Product of Sums (POS) and Sum of Products (SOP) forms. Combinational logic circuits: Design and analysis procedures. Decoders, encoders, multiplexers, demultiplexers, ROM, PLA and PAL. Sequential logic circuits: Flip Flops (RS, D, JK, T), design procedure for clocked sequential circuits, counters. Registers and shift registers. Prerequisite: COM101
ELE206 Engineering Analysis (3-0-3)
Developing C++ programs to solve electrical engineering problems. MATLAB programming environment, vectors and matrices, input/output, M-files: scripts and functions, control statements. Plotting with MATLAB. GUI in MATLAB. Introduction to SIMULINK. Electrical system modeling via SIMULINK. Introduction to LabVIEW. Development of Virtual Instruments using LabVIEW. Prerequisite: ELE101
ELE314 Microcontrollers and Applications (3-2-4)
Introduction to microprocessor and its internal architecture. Typical microprocessor bus systems. Addressing modes and address decoding. Memory and I/O interface. Assembly language programming. Microcontrollers and embedded systems. Programming of microcontroller using C language. Interrupt processing and interrupt-based control. Microcontroller interfacing to real-world applications. Design and implementation of course projects using a microcontroller. Prerequisites: ELE101, ELE202
ELE307 Control Systems (3-2-4)
Introduction to Control Systems: Characteristics, time response, steady-state error. Open loop and closed loop concepts, transfer function, time domain, frequency domain, stability of linear feedback control systems, Root Locus method, Bode diagram. Design of feedback control systems: Principles of design, design with the PD, PI, and PID controllers. Performance evaluation of feedback control systems. Compensation: phase-lead, phase-lag and lead-lag compensation. Prerequisite: ELE204
ELE313 Sensors and Instrumentation (3-2-4)
Basic measurement concepts, sources and types of measurement errors, sources of noise and interference and how to minimize them. Analysis and design of DC and AC bridge circuits and their applications. Operating principles and specifications of DVM and DMM. Transducers and their applications in measurement systems. Operation analysis of electromagnetic sensors for flux, current and position sensing. Oscilloscopes: types, specifications, operation and measurements. Analyzers: types, architecture and the optimal tuning. Design projects related to different types of measuring instruments Prerequisites: ELE305, ELE206
ELE492 Power Switching Devices (3-0-3)
Introduction to power electronics devices, power transistors, IGBTs and SITs. Thyristors: characteristics, types, models, operations, thyristor commutation techniques and commutation circuit design. Analysis and design of uncontrolled and controlled rectifiers. AC voltage controllers with resistive and inductive load. DC choppers: principles and classifications. Principles of operation and performance parameters of different types of inverters. DC and AC drives. Power system applications. Prerequisite: ELE305, ELE207
ELE491 Industrial Control Systems (3-2-4)
Industrial control principles. Block diagram representation of industrial control systems. Application of analog and digital signal conditioning in industrial control. Thermal, optical, displacement, position, strain, motion, pressure, and flow sensors used in industrial control. Actuators in industrial control. Data Logging, Supervisory Control, Computer-based Controllers. Programmable Logic Controllers (PLCs). Sequential programming, Ladder diagrams. Introduction to Process Control Systems. Foundation Fieldbus and Profibus standards. Prerequisite: ELE307
ELE203 Circuit Analysis I (3-2-4)
Basic quantities: charge, current, voltage, resistance, energy and power. Analysis of series, parallel and series-parallel D.C. resistive circuits using Ohm's law, Kirchhoff's voltage and current laws. Star-Delta and Delta-Star Transformations. Analysis of more resistive circuits using loop and nodal methods, superposition, source transformation, Thevenin’s and Norton theorems, maximum power transfer theorem. Transient analyses of RC, RL, and RLC circuits with DC excitation. Prerequisites: PHY122
ELE207 Circuit Analysis II (3-2-4)
AC circuits: impedance and admittance, phasors and phasor diagrams, series and parallel circuits, power and power factor correction. Steady-state response using phasor method. Nodal and loop analysis, application of circuit theorems. Steady-state power analysis. Magnetically-coupled circuits. Analysis of balanced three-phase circuits. Frequency response of simple circuits. Series and parallel resonance. Prerequisites: ELE203
ELE312 Power Systems and Electrical Machines (3-2-4)
Introduction to power systems. Control of reactive power, voltage and frequency. Contemporary issues related to electrical energy. Basics of power system protection. Principles of DC and AC machines and their types. Ideal and practical transformer. Voltage regulation and efficiency of transformer. Prerequisites: ELE207
ELE470 Power System Protection and Control (3-0-3)
An overview of electric industry structure, modern power system, system protection and energy control center. Introduction to power system apparatus: power transforms, circuit breakers, CTs, VTs, CCVTs and line trap. Primary and backup protection of transmission lines. Protection of transformers and busbars. Protection schemes for rotating machinery. Operation, algorithms and advantages of digital relays. Techniques for voltage and frequency control of power systems. Prerequisites: ELE307, ELE312
ELE471 Power Generation and Transmission (3-0-3)
Introduction to different types of conventional power plants for generation of power. Operating principles of steam power plants, hydroelectric power plants, hydro turbines, hydro generators, gas-turbine plant, gas-power plant and combined-cycle gas-power plant. Comparison of different transmission line insulators. String efficiency and its improvement. Calculations for sag and tension in designing a transmission line. Classification and comparison of underground cables. Prerequisite: ELE312
ELE463 Renewable Energy Systems (3-2-4)
Introduction to renewable energy sources. Electrical characteristics and performance evaluation of PV cells, modules, panels and arrays. Optimization of PV arrays. Design of a stand-alone PV system with battery storage. Wind energy conversion systems, sizing and site matching. Hydro generation and types of hydropower turbines. Solar thermal and ocean thermal energy conversion. Tidal energy, wave power generation, geothermal and biomass energy systems. Types of energy storage systems. Prerequisite: ELE312
ELE477 Smart Grid Renewable Energy Systems (3-0-3)
Basic concept of electric power grid. Types and equipment at grid stations. Grid station automation. Fundamental concepts of power grid integration on microgrids of renewable energy sources. Modeling converters in microgrids. Smart meters and monitoring systems. Design of PV microgrid generating station. Microgrid wind energy systems. Prerequisite: ELE463
ELE464 Power System Analysis (3-0-3)
Explanation of Per Unit system and determination of the equivalent circuits of synchronous generator and three-phase power transformers. Parameters of transmission lines. The equivalent circuit models of transmission lines. Power flow analysis. Analyzing symmetrical and unsymmetrical faults in power system. Stability of power systems. Prerequisite: ELE312
ELE472 Electrical Power Distribution Systems (3-0-3)
Introduction to electrical power distribution. Power distribution equipment, underground distribution, radial, ring and network distribution systems. Conductors and insulators in power distribution systems. Electrical distribution inside buildings. Analyzing single phase and three phase power distribution systems. Measurement equipment for distribution systems. Discussion of various distribution system considerations. Design of a power distribution system for a small building. Prerequisite: ELE312
ELE436 Selected Topics in Power and Renewable Energy (3-0-3)
Topics of current interest in Power and Renewable Energy as selected by the faculty and approved by the EE Department. The course is tailored according to market demands and the technology directions. Prerequisite: ELE463
ELE479 Directed Study in Power and Renewable Energy (3-0-3)
Directed study in Power and Renewable Energy is conducted under the supervision of a faculty member. A student interested to undertake such a study shall submit a proposal outlining the description of the work to be performed with clearly defined objectives and intended outcomes. The study may include experimental investigation, computer simulation or completely theoretical research. The proposal must be approved by the concerned faculty and Head of the EE Department. Prerequisites: ELE463, Advisor’s Approval
ELE436 Selected Topics in Electr. and Comm. (3-0-3)
Topics of current interest in Electronics and Communication as selected by the faculty and approved by the EE Department. The course is tailored according to market demands and the technology directions. Prerequisites: ELE305, ELE302
ELE437 Directed Study in Electronics and Communication (3-0-3)
Directed study in Electronics and Communication is conducted under the supervision of a faculty member. A student interested to undertake such a study shall submit a proposal outlining the description of the work to be performed with clearly defined objectives and intended outcomes. The study may include experimental investigation, computer simulation or completely theoretical research. The proposal must be approved by the concerned faculty and Head of the EE Department. Prerequisites: ELE302, ELE310, Advisor’s Approval
MTH121 Engineering Mathematics I (3-0-3)
Limits of functions, theorems about limits, evaluation of limit at a point and infinity, continuity. Derivatives of algebraic and trigonometric functions, maxima and minima, engineering applications of derivatives. The definite and indefinite integrals and their applications. Integration by parts, Integration using powers of trigonometric functions, Integration using trigonometric substitution, Integration by partial fractions. Integration of improper integrals. Transcendental Functions. Prerequisite: None
MTH122 Engineering Mathematics II (3-0-3)
Matrix addition, subtraction, multiplication and transposition. Complex numbers, algebraic properties of complex numbers, absolute values, complex conjugate, polar representation, powers and roots. Functions of several variables. Double and triple integrals in rectangular and polar coordinates. Applications of multiple integrals in engineering. Infinite sequences, tests for convergence, power series expansion of functions, Taylor series, Laurent series, Fourier series and their applications in engineering. Prerequisite: MTH121
PHY121 Engineering Physics I (3-2-4)
Vectors, motion, and Newton’s laws. Work, energy, momentum and conservation of momentum. Rotation of rigid bodies, dynamics of rotational motion. Equilibrium and elasticity. Stress and strain. Periodic motion. Engineering applications. Prerequisite: None
PHY122 Engineering Physics II (3-2-4)
Electric charge and electric field. Coulomb’s law and Gauss’s law with applications. Capacitance and dielectrics. DC circuits. Magnetic fields. Ampere’s law and its applications. Electromagnetic induction, Faraday’s law, Lenz’s law, induced electric fields. Self- and mutual-inductance. Electromagnetic waves and Maxwell’s equations. Optics and its engineering applications. Prerequisite: None
CHE101 Chemistry for Engineers (2-2-3)
Atoms, molecules, ions and formulas of ionic compounds. Electronic structure and the periodic table. Quantum numbers, energy levels and orbital. Orbital diagrams of atoms. Various types of bonds. Chemistry of the metals and semiconductors. Introduction to organic chemistry, bonding and types of hybridization in carbon atom, alkanes and cyclo alkanes, alkyl and halogen substituents. Alkenes and alkynes, Diels-Alder reaction. Types, properties, and use of polymers. Prerequisite: None
ELE102 Introduction to Engineering (1-0-1)
Engineering profession and the role of engineers in modern developments, engineering ethics. Various engineering disciplines with special emphasis on electrical engineering. Importance of math and science to engineers. Engineering design and analysis, lab skills for engineers, computer skills for engineers. Electrical Engineering curriculum, curriculum planning and management. Critical thinking, soft skills for engineers, creativity, communication skills. Case studies on engineering ethics. Prerequisite: None
MTH221 Engineering Mathematics III (3-0-3)
Vector Calculus and its engineering applications. First order differential equations. Homogeneous linear second-order differential equations with constant and variable coefficients, non-homogeneous linear second-order differential equations with constant coefficients, higher-order linear differential equations with constant coefficients. Power series solution of differential equations. Laplace Transform, Inverse Laplace Transform. Application of Laplace Transform to solve ordinary differential equations. Introduction to partial differential equations (PDEs), first order PDEs, second order PDEs, boundary value problems, engineering applications. Prerequisite: MTH122
MTH222 Engineering Mathematics IV (3-0-3)
Linear Algebra: Matrices and determinants, solution of systems of linear equations, eigenvalues and eigenvectors, engineering applications, computer exercises. Complex Analysis: Complex functions, derivative of complex functions, analytic functions, Cauchy-Riemann equations, harmonic functions. Fourier analysis: Fourier Series, Fourier Integrals, Fourier series of even and odd functions with applications. Discrete Mathematics and its engineering applications. Prerequisite: MTH221
ELE301 Report Writing and Presentation (3-0-3)
Writing of technical reports, brief reports, and progress reports. Business communication: business letters and memos, executive summary, business reports. Oral presentation: planning, preparation of visuals, and delivering of an oral presentation. Prerequisites: ELE102 + Junior Standing
ELE304 Probability and Random Variables (3-0-3)
Concept of Probability. Discrete and continuous random variables. Operations on single random variable: Expected values and moments. Joint cumulative distribution function and joint probability density function. Sum of random variables. Independent random variables. Jointly Gaussian random variables. Definition and classification of random process, transmission of random process through linear filters, and optimum filtering. Applications in signal processing and communication systems. Prerequisite: MTH122
ELE410 Engineering Management (3-0-3)
Introduction to engineering management and role of effective management. Strategic and operational planning, forecasting, action planning. Organization: activities, organizational structures, delegating, establishing working relationships. Basics of leadership. Controlling activities: setting standards, measuring, evaluating, and improving performance. Review of Accounting. Financial Analysis. Financial Forecasting, Planning and Budgeting. Time Value of Money, Capital Budgeting Decision. Prerequisite: ELE301
ELE438 ELE488, ELE468 Graduation Project I (1-4-3)
Teams of 3-4 students shall design, implement, test, and demonstrate their graduation project in two semesters. Graduation Project I is to be completed in first semester and it includes literature survey, action plan, design of complete project taking into account realistic constraints, computer simulation (if applicable), partial implementation and testing. Report writing and oral presentation. Prerequisite: ELE310
ELE439, ELE489, ELE469 Graduation Project II (1-4-3)
It is a continuation of Graduation Project I in the second semester. Students will complete the implementation and testing of the remaining part of their design. They will integrate the complete project, test it, and prepare a PCB. Report writing, oral presentation, poster presentation, and project demonstration. Prerequisite: ELE438, ELE488, ELE468
ELE465 Senior Seminar (1-0-1)
The course aims to develop students’ understanding of contemporary issues as well as the impact of engineering solutions in a global, economic, environmental, and societal context. It will also improve their oral presentation skills. Prerequisite: ELE301
ELE497 Engineering Training (3)
To expose students to a learning environment where they can apply what they have learned in the classroom to a professional setting and enhance their abilities to correlate theoretical knowledge with professional practice. Prior to starting their external training, students shall take two weeks intensive internal training to prepare them for external training. Prerequisite: Completion of 75 credit hours.
USTF Department of Electrical Engineering Faculty
No. |
Name |
Rank |
Degrees Held |
Conferring institution |
1 |
Ali Abouelnour |
Professor |
Ph. D. Electrical Engineering Microwave Electronics |
Technical University Hamburug-Harburg |
2 |
Mohammed Tarique |
Associate Prof. |
Ph. D. Communication Network |
University of Windsor |
3 |
Amir J. Majid |
Associate Prof. |
Ph. D. Control and Power Engineering |
Loughborough University |
4 |
Yomna Shaker |
Assistant Prof. |
Ph. D. Electrical Power and Machines |
Cairo University |
Student-Full Faculty Ratio by Colleges for fall semester2022-2023 (2022-1)
College |
Student-Full Time Faculty Ratio 2022-1 |
College of Engineering and Information Technology |
13.11 |